Federated Environment¶

The python SystemDS supports federated execution. To enable this, each of the federated environments have to have a running federated worker.

Start Federated worker¶

To start a federated worker, you first have to setup your environment variables. A simple guide to do this is in the SystemDS Repository.

If that is setup correctly simply start a worker using the following command. Here the 8001 refer to the port used by the worker.

systemds WORKER 8001

Simple Aggregation Example¶

In this example we use a single federated worker, and aggregate the sum of its data.

First we need to create some data for our federated worker to use. In this example we simply use Numpy to create a test.csv file

# Import numpy
import numpy as np
a = np.asarray([[1,2,3], [4,5,6], [7,8,9]])
np.savetxt("temp/test.csv", a, delimiter=",")

Currently we also require a metadata file for the federated worker. This should be located next to the test.csv file called test.csv.mtd. To make this simply execute the following:

echo '{ "format":"csv", "header":false, "rows":3, "cols":3 }' > temp/test.csv.mtd

After creating our data we the federated worker becomes able to execute federated instructions. The aggregated sum using federated instructions in python SystemDS is done as follows

# Import numpy and SystemDS
import numpy as np
from systemds.context import SystemDSContext

# Create a federated matrix
## Indicate the dimensions of the data:
### Here the first list in the tuple is the top left Coordinate,
### and the second the bottom left coordinate.
### It is ordered as [col,row].
dims = ([0,0], [3,3])

## Specify the address + file path from worker:
address = "localhost:8001/temp/test.csv"

with SystemDSContext() as sds:
  fed_a = sds.federated([address], [dims])
  # Sum the federated matrix and call compute to execute
  print(fed_a.sum().compute())
  # Result should be 45.

Multiple Federated Environments¶

In this example we multiply matrices that are located in different federated environments.

Using the data created from the last example we can simulate multiple federated workers by starting multiple ones on different ports. Start with 3 different terminals, and run one federated environment in each.

systemds WORKER 8001
systemds WORKER 8002
systemds WORKER 8003

Once all three workers are up and running we can leverage all three in the following example

import numpy as np
from systemds.context import SystemDSContext

addr1 = "localhost:8001/temp/test.csv"
addr2 = "localhost:8002/temp/test.csv"
addr3 = "localhost:8003/temp/test.csv"

# Create a federated matrix using two federated environments
# Note that the two federated matrices are stacked on top of each other

with SystemDSContext() as sds:
  fed_a = sds.federated(
    [addr1, addr2],
    [([0,0], [3,3]), ([0,3], [3,6])])

  fed_b = sds.federated(
    [addr1, addr3],
    [([0,0], [3,3]), ([0,3], [3,6])])

  # Multiply, compute and print.
  res = (fed_a * fed_b).compute()

print(res)

The print should look like

[[ 1.  4.  9.  1.  4.  9.]
 [16. 25. 36. 16. 25. 36.]
 [49. 64. 81. 49. 64. 81.]]

Note

If it does not work, then double check that you have:

a csv file, mtd file, and SystemDS Environment is set correctly.